Cadence 5141 na Linux AS4

E

elec_zxm

Guest
Imam umestiti kadence 5141 na Linux AS4.Ampak jaz vekanje prost dostop.I so se spremenile v spis. Bashrc, kot followings:
########################################
# Vir globalne opredelitve
if [-f / etc / bashrc], nato
./ Etc / bashrc
fi
# Cadence 5141
izvoz CDS_ROOT = / ecad/IC5141
izvozno CDS_INST_DIR = $ CDS_ROOT
izvozno CDS_Netlisting_Mode = Analog
izvoz CDSDIR = / ecad/IC5141/tools
izvozno CDS_LIC_FILE = $ CDS_ROOT / share / licence / license.dat
PATH = $ PATH: $ CDSDIR / bin
PATH = $ PATH: $ CDSDIR / dfII / bin
PATH = $ PATH: $ CDSDIR / Drakula / bin
########################################

Toda, ko sem prost icfb, se prikaže zaslon "command not found";

Naletel sem ", ki icfb", se zdi,

[ECAD (at) localhost ~] $, ki icfb
/ Usr / bin / ki: ne icfb v (/ usr / Kerberos / bin: / usr / local / bin: / usr / bin: / bin: / usr/X11R6/bin: / home/ecad/IC5141 /
orodja / bin: / home/ecad/IC5141/tools/dfII/bin: / home/ecad/IC5141/tools/dracula/bin:

/ Home / eCAD / bin: / home/ecad/IC5141/tools/bin: / home/ecad/IC5141/tools/dfII/bin:
/ Home/ecad/IC5141/tools/dracula/bin)
[ECAD (at) localhost ~]$......................................... ................................................

Končno sem teči "setenv" v cshell, rezultati so:
...
PATH = / usr / Kerberos / bin: / usr / local / bin: / usr / bin: / bin: / usr/X11R6/bin: / home / eCAD
/ IC5141/tools/bin: / home/ecad/IC5141/tools/dfII/bin: / home/ecad/IC5141/tools
/ Dracula / bin: / home / eCAD / bin: / home/ecad/IC5141/tools/bin: / home/ecad/IC5141
/ Tools / dfII / bin: / home/ecad/IC5141/tools/dracula/bin
...

Se motim?Zakaj sistem vekanje odkriti icfb ukaz?
Vsakdo pozna problem?Hvala veliko!
 
Toda podjetje uporablja moj AS4 gladko!
Hočem videti 1024 * 768, ne 800 * 600 na Redhat 9.0.

 
Pozdravljeni!
Mislim, da je treba napisati naslednji stringdfII/bin

PATH = $ PATH: $ CDSDIR / tools /
dfII / bin

Boste preveri obstoj simbolno povezavo v imeniku $ CDSDIR
orodja -> tools.lnx86
tools.lnx86

 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top